MIC Chinese Simplified Chinese Traditional English
Inquiry Basket Inquiry Basket (0) item | Recent Visit History | Join Audited Suppliers

Home » Product Directory » Industrial Equipment & Components » Power & Generating Sets » Generator Parts & Accessories » Deep Sea Generator Set Control Module DSE5220

Deep Sea Generator Set Control Module DSE5220

Deep Sea Generator Set Control Module DSE5220
Deep Sea Generator Set Control Module DSE5220

Product Description

Deep Sea Generator Set Control Module DSE5220

The DSE5220 is an automatic mains failure control module designed to provide advanced load share functionality for diesel and gas generating sets that include non-electronic/electronic engines. The module also provides excellent engine monitoring and protection features. The module monitors the mains (utility) supply and upon detection of a loss in power automatically starts the generating set.

The module's synchronizing functions include automatic synchronizing with built in synchroscope and closing onto dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs).

The module has the ability to monitor under/over generator volts, over current, under/over generator frequency, under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, low/high DC battery volts, fail to stop, generator short circuit protection, reverse power, generator phase rotation error, earth fault protection, loss of speed signal, fail to open, fail to close, out of sync, MPU open circuit failure, negative phase sequence and loss of excitation.

FEATURES
Electronic engine capability
RS232 or RS485 remote communications
Modbus RTU
Pin number protected front panel programming
Engine exercise timer
Back-lit LCD 4-line text display
Multiple language options
Voltage measurement
Configurable inputs (9)
Configurable outputs (5)
Automatic start
Manual start
Audible alarm
LED indicators
Built-in governor and AVR control for easy operation and panel engineering
Engine history event log
Engine protection
Fault condition notification to a designated PC
Front panel mounting
PC configuration
Mains (utility) failure detection
Configurable alarm timers
Configurable start & stop timers
Automatic load transfer
SMS alert messaging
Multi set communications
Front panel mounting
Remote control and monitoring.

DC  Supply Continuous  voltage  rating  :
8V  to  35V
Cranking  dip  protection  :
Able  to  survive  0V  for  50mS,   providing  supply  was  at  least  10V  before  dropout  and  supply  recovers  to  5V.   This  is  achieved  without  the  need  for  internal  batteries
Charge  Fail/  Excitation:
0V  to  35V  fixed  power  source  25W
Max.   Standby  Current:
375mA  at  12V.   200mA  at  24V.
Max.   Operating  Current:
460mA  at  12V.   245mA  at  24V
Alternator  Input Range:
5V  -  277(ph-N)  (+20%)  50Hz  -  60Hz  (Minimum  15V  AC  Ph-N)
Accuracy:
1%  of  full  scale  Average  sensing
Supported  topologies:
3  Phase  4wire
Single  phase  2  wire
3  phase  3  wire
2  Phase  3  wire  L1  &   L2
2  Phase  3  wire  L1  &   L3
Mains  Input Range:
15V  -  277(ph-N)  (+20%)  50Hz  -  60Hz
Accuracy:
1%  of  full  scale  Average  sensing
Supported  topologies:
3  Phase  4wire
Single  phase  2  wire
3  phase  3  wire
2  Phase  3  wire  L1  &   L2
2  Phase  3  wire  L1  &   L3
CT’ s Burden:
0.5VA
Primary  rating:
1A  -  6000A  (user  selectable)
Secondary  rating:
5A  secondary
Accuracy  of  measurement:
1%  of  full  load  rating  (when  using  0.5%  or  better  CTs)
Lower  class  CTs  will  reduce  the  overall  accuracy  of  the  reading.
Recommendations:
Class  1  required  for  instrumentation
Protection  class  required  if  using  for  protection.
Magnetic  Pickup Voltage  range  :
+/-  0.5V  minimum  (during  cranking)  to  70V  Peak
Frequency  range:
10, 000  Hz  (max)
Relay Outputs Fuel:
16  Amp  DC  at  supply  voltage
Start:
16  Amp  DC  at  supply  voltage
Auxiliary  outputs  1, 2, 3:
5  Amp  DC  at  supply  voltage
Dimensions Overall:
240mm  x  172  mm  x  57mm
(9  ½ “   x  6  ¾ ”   x  2  ¼ ” )
Panel  cut-out:
220mm  x  160mm
(  8.7”   x  6.3” )
Max  panel  thickness  8mm  (  0.3” )
   
HS Code:  8503009090
Trademark:  DSE
Model NO.:  5220
Productivity:  1, 000 PCS/Month
Unit Price:  US $ 0-1000/ Piece
Shipment Terms:  by Air/ by Sea
Origin:  Chongqing, China
Packing:  Carton Box
Gross Weight:  1kg
Package Size:  290mm*180mm*65mm
Panel Cut-out:  220mm*160mm
Color:  Black
Display:  LED & LCD
Application Range:  Gas & Diesel Generator Started With Battery
Power Range:  Above 10kw
Package:  Carton Box
in Stock:  Yes
Warranty:  1 Year or Cumulative 1000-Hour-Operating Time
Export Markets:  North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Company: Chongqing Boce Technology Co., Ltd.

Click here to send inquiry

Most Popular

Quick Products